Solar Water Pump Booster 3in Pond DC Controller Panel Borehole System 400W 48V. MARS ROCK deep well pump is the latest technology pump which using DC branchless high speed PMSM (Permanent Magnet Synchronous Motor)as the driver.
It has high speed and high effciency features but the volume and weight are less than 1/3 to 1/6 comparing with the traditional deep well pump on the market. Deep well pump controller has frequency conversion speed adjusting and constant speed function, it can apply constant pressure and flow of water, timing mode for on/ off pump, remote control and intelligent operation function as well. The controller can be used in various output which can maintain the water output stable.
The deep well pump motor max effhciency can reach up to 92%. Single phase power factor 0.99 which is more effcient than the traditional asynchronous pump. (1) DC branchless high- speed synchronous motor. Which has high speed and high efficient feature but smaller size and weight.
(2)The speed of the water pump is frequency-converted. The operation frequency is from 0 to 7200 rpm. The working frequency of low-voltage DC48V is 0 6000 rpm, which is the most advanced DC frequency conversion technology on the global market. Automatic frequency conversion according to the intensity of sunlight to adjust the pump running speed. Automatically turn on when there is sunlight, and automatically turn off when there is no sunlight.
The fully automatic unmanned working mode makes the solar energy utilization rate of more than 5% higher than other brands which with MPPT controller. So it is suitable for automatic irrigation of pastures and orchards. (4) Grid AC power and solar power can be switched freely to pump with DC/AC dual function inverter, user can switch its electrical power from urban city grid or from solar manually according to local climatic conditions.
(5) Do not need float switch if there is no water in well for 1 minute, solar pump will stop working automatically. After 30 minutes, pump will start automatically power on to test whether there is water or not. Have Multi-functions and Auto-protecting, will the motor. (6)Stainless steel casin and screw, copper winding, brushless motor, intelligent external controller, NSK imported bearing.
Advantages of Intelligent Water Pump Controller. MPPT funcation, the solar power utilization rate is higher. Can customize controller with battery charge function. LED displays the power, voltage, current, speed etc. Automatically start and stop working.
Waterproof and leak-proof: double seal effect. Excellent thermostability: withstand 85°C high temperature. Soft start: no impulse current, protects the pump motor.
High voltage / low voltage protection, over-current / over-load protection, the winding won' t be burned. Note: If the solar current exceeds our guidance range but the output VOltage is within the safe value, MARS ROCK intelligent pump controller will automatically adjust and limit the maximum output current from solar no more than 15A. 3 Inch PMG Deep Well Pump Technical Data. How to Match Solar Panel?
Solar pump is specially optimized design to work with modularization of DC power supplied which includes the mainstream solar modules, 18V(36 cells), 24V(48 cells), 30V(60 cells), 36V(72 cells). At the same time, the battery can also be directly used for as DC power supply. DC 48V water pump is specially designed for powering 48V Electric Car.
Solar power generation efficiency is related to many factors such as peak sunshine, installation angle, and ambient temperature. 45%, 60% up to 70% at 12 noon, and slowly down 60%, 50%, 40%in the afternoon, fall to 30% in the afternoon. The solar panel calculated by dividing the pump power by 70% can only have 3 to 4 hours of rated power required for the work, and the rest of the time does not meet the rated working requirements of the pump in the operating hours. If the electricity consumption is divided by the power generation efficiency by 50%, the pump can be rated for 6 hours a day and 8 hours a day. In the pump selection of solar panel power, the first step is to determine the power consumption of the pump, that is, the pump input power is determined, and then divide by the solar panel's power generation efficiency of 65% (up to 70%) or multiplied by 1.5, the result is the nominal power of the solar panels which need to be supplied to the pump.
Based on the power of this solar panel, the number of solar panels to be used with how much power and how much power is used is calculated. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact.
It must also be in the original packaging. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Water Pumps & Kits".
The seller is "audosta" and is located in this country: CN. This item can be shipped worldwide.