[Complete Solar Water Pump System] - This solar pump kit includes a high strength water pump, 200W solar panel, and a 20Ah battery backup and other necessary parts for the water pump system. [Longer Working Time] - With the 20Ah battery fully charged, the solar well pump system will continue working for around 1 hours after sunset. And the battery backup can used to charge your other home appliances.
[Easy to Set Up] - With all the necessary accessories, the all-in-one water pump system is easy to set up. The well pump is compact, lightweight, and easy to carry and use with no need for loud gas/diesel pumps. [Strength] - DC 12V, 5A Max, Flow rate: 12LPM/3.2GPM, maximum lift: 230ft (70m), maximum submersion: 100ft (30m), cable length: 10ft (3m). [Upgrade Design] - The surface of the water pump is covered with a layer of resin coating, which greatly improves the corrosion resistance of the water pump and enables the user's water pump to obtain a longer service life.
[Wide Application] - The all-in-one complete solar well pump system offers an ideal solution for remote watering without electric power, like the garden, farm irrigation, and tank filling, etc. High Efficient 100W Monocrystalline Solar Panel.
The solar panel has a great performance even on cloudy day. Maximum/Peak Voltage(Vmp): 20.6V. Open Circuit Voltage(Voc): 17.3V. Maximum/Peak Current(Imp): 6.88A. Short circuit current (Isc): 5.79A.
Kind of glass and its thickness: Low Iron, high transparency tempered glass of 3.2mm. 12V Stainless Steel Submersible Deep Well Pump. Cable Length: 10 Feet (3 Meters).Maximum Lift:: 230 Feet (70 Meters). Maximum Submersion: 100 Feet (30 Meters).
Inlet: 50 Mesh Stainless Steel Inlet Screen. The Outer Diameter of Outlet Port: 1/2''(12.7mm) Barbed Fitting. Internal Bypass: 130-150 PSI Max(9.0-10.0BARS). Package Size: 13.97"x4.33"x5.12 (355130110mm).
For 4 wells or larger. Quick disconnect with "Watertight-Gland" Design Pat Pend. Corrosion-proof housing with stainless-steel fastener. State of the art solid diaphragm. Pump Design: Positive Displacement 3 Chamber Diaphragm Pump.Motor: Permanent Magnet Thermally Protected. Internal Bypass: 105-110 PSI Max. Outlet Port: 1/2 (12.7mm) Barbed Fitting. Inlet: 50 Mesh Stainless Steel filter. Material: 304 stainless steel covered with resin coating. 20AH LiFePO4 Lithium Iron Phosphate Battery. Maximum Charge/ Discharge Current: 30A. Maximum Charge Voltage: 14.5V. Terminal M5Battery SizeLWHinch: 7.16.33 inch. Battery Size 7.16.33 inches. Battery Weight(kg) 4.85kg. Never reverse connection of positive and negative electrodes of battery. Never knock or throw, step on the battery. Never use metal to directly connect the positive and negative terminals of the battery.
Never directly solder the battery or pierce the battery with nails or other sharp objects. Never immerse the battery in seawater or water.
Not for use in car starter batteries. Do not use or place the battery at high temperatures, otherwise it may cause the battery to overheat, Fire or malfunction, shortened life. High Efficiency LCD Display 20A Solar Charge Controller.
Battery voltage: 12V / 24V automatically. USB output: 5V / 2A. Dimensions / weight: 138 x 85 x 30 mm / 150 g. Installation hole size: 124 x 50mm.
2 pc 100W mono solar panel. 1 pc 12V DC Solar Well Water Pump. The item "200W Mono Solar Panel + 12V Submersible Deep Well Pump + 20AH LiFePO4 Battery" is in sale since Monday, May 31, 2021. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Water Pumps & Kits". The seller is "leadmotools" and is located in Los Angeles, California.
This item can be shipped to North, South, or Latin America.